bFLT
VUUU4
VUUUX
@ #!
@ c!
 bB?
0B2 0
-I18N
AF: (inet) +UNIX +INET -INET6 -IPX -AX25 -NETROM -ATALK -ECONET -ROSE 
HW: (ether) +ETHER -ARC +SLIP +PPP -TUNNEL -TR -AX25 -NETROM -FR -ROSE -ASH -SIT -FDDI -HIPPI -HDLC/LAPB 
net-tools 1.52
arp 1.85 (1999-01-05)
arp: need host name
args=%s
priv
temp
trail
dontpub
%s: feature `%s' not supported.
Please recompile `net-tools' with newer kernel source or full configuration.
ATF_DONTPUB
auto
ATF_MAGIC
netmask
255.255.255.255
arp: SIOCDARP(nopub)
No ARP entry for %s
SIOCDARP(priv)
arp: SIOCDARP(pub)
SIOCDARP(pub)
arp: cant get HW-Address for `%s': %s.
arp: protocol type mismatch.
arp: device `%s' has HW address %s `%s'.
arp: need hardware address
arp: invalid hardware address
arp: SIOCSARP()
SIOCSARP
arp: cannot open etherfile %s !
>> %s
arp: format error on line %u of etherfile %s !
arp: cannot set entry on line %u of etherfile %s !
ether
Address
HWtype
HWaddress
    Flags Mask
  Iface
%-23.23s
%-8.8s%-20.20s
(incomplete)
%-6.6s%-15.15s %s
%s (%s) at 
<incomplete> 
%s [%s] 
netmask %s 
PERM 
PUP 
TRAIL 
on %s
/proc/net/arp
%s 0x%x 0x%x %100s %100s %100s
Entries: %d
Skipped: %d
Found: %d
%s (%s) -- no entry
arp: in %d entries no match found.
Usage:
  arp [-vn]  [<HW>] [-i <if>] [-a] [<hostname>]             <-Display ARP cache
  arp [-v]          [-i <if>] -d  <hostname> [pub][nopub]    <-Delete ARP entry
  arp [-vnD] [<HW>] [-i <if>] -f  <filename>              <-Add entry from file
  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [temp][nopub] <-Add entry
  arp [-v]   [<HW>] [-i <if>] -s  <hostname> <hwaddr> [netmask <nm>] pub  <-''-
  arp [-v]   [<HW>] [-i <if>] -Ds <hostname> <if> [netmask <nm>] pub      <-''-
        -a                       display (all) hosts in alternative (BSD) style
        -s, --set                set a new ARP entry
        -d, --delete             delete a specified entry
        -v, --verbose            be verbose
        -n, --numeric            dont resolve names
        -i, --device             specify network interface (e.g. eth0)
        -D, --use-device         read <hwaddr> from given device
        -f, --file               read new entries from file
  <HW>=Use '-H <hw>' to specify hardware address type. Default: %s
  List of possible hardware types (which support ARP):
%s: hardware type not supported!
inet
%s: address family not supported!
A:H:adfp:nsei:t:vh?DNV
arp: -N not yet supported.
arp: %s: unknown address family.
arp: %s: unknown hardware type.
arp: %s: kernel only supports 'inet'.
arp: %s: hardware type without ARP support.
socket
econet
tcpip
unix
netrom
appletalk
inet6
inet
ax25
UNSPEC
UNIX Domain
DARPA Internet
Please don't supply more than one address family.
Too much address family arguments.
Unknown address family `%s'.
    
    
%s (%s) 
%02X-
[NONE SET]
/proc/net/unix
unix
unspec
out of virtual memory
%d.%d.%d
Local Loopback
UNSPEC
Serial Line IP
VJ Serial Line IP
6-bit Serial Line IP
VJ 6-bit Serial Line IP
Adaptive Serial Line IP
Ethernet
Point-to-Point Protocol
    
    
%s (%s) 
You cannot start PPP with this program.
default
[NONE SET]
inet
%02X:%02X:%02X:%02X:%02X:%02X
[NONE SET]
ether
%02X-
[NONE SET]
unspec
loop
slip
cslip
slip6
cslip6
adaptive
+-#0 
hlLq
%nbopxXudicsfgGeEaA
(nil)
(null)
hlLq
%n[csoupxXidfeEgG
%s%s%s
Unknown Error: errno
Wrong medium type
No medium found
Quota exceeded
Remote I/O error
Is a named type file
No XENIX semaphores available
Not a XENIX named type file
Structure needs cleaning
Stale NFS file handle
Operation now in progress
Operation already in progress
No route to host
Host is down
Connection refused
Connection timed out
Too many references: cannot splice
Cannot send after transport endpoint shutdown
Transport endpoint is not connected
Transport endpoint is already connected
No buffer space available
Connection reset by peer
Software caused connection abort
Network dropped connection because of reset
Network is unreachable
Network is down
Cannot assign requested address
Address already in use
Address family not supported by protocol
Protocol family not supported
Operation not supported on transport endpoint
Socket type not supported
Protocol not supported
Protocol not available
Protocol wrong type for socket
Message too long
Destination address required
Socket operation on non-socket
Too many users
Streams pipe error
Interrupted system call should be restarted
Illegal byte sequence
Cannot exec a shared library directly
Attempting to link in too many shared libraries
.lib section in a.out corrupted
Accessing a corrupted shared library
Can not access a needed shared library
Remote address changed
File descriptor in bad state
Name not unique on network
Value too large for defined data type
Not a data message
RFS specific error
Multihop attempted
Protocol error
Communication error on send
Srmount error
Advertise error
Link has been severed
Object is remote
Package not installed
Machine is not on the network
Out of streams resources
Timer expired
No data available
Device not a stream
Bad font file format
File locking deadlock error
Invalid slot
Invalid request code
No anode
Exchange full
Invalid request descriptor
Invalid exchange
Level 2 halted
No CSI structure available
Protocol driver not attached
Link number out of range
Level 3 reset
Level 3 halted
Level 2 not synchronized
Channel number out of range
Identifier removed
No message of desired type
Operation would block
Too many symbolic links encountered
Directory not empty
Function not implemented
No record locks available
File name too long
Resource deadlock would occur
Math result not representable
Math argument out of domain of func
Broken pipe
Too many links
Read-only file system
Illegal seek
No space left on device
File too large
Text file busy
Not a typewriter
Too many open files
File table overflow
Invalid argument
Is a directory
Not a directory
No such device
Cross-device link
File exists
Device or resource busy
Block device required
Bad address
Permission denied
Out of memory
Try again
No child processes
Bad file number
Exec format error
Arg list too long
No such device or address
I/O error
Interrupted system call
No such process
No such file or directory
Operation not permitted
Success
%s: %s -- %c
illegal option
option requires an argument
%.*s
%0*d
%.*d
%c%+.2d