bFLT
:<0K
@ #!
@ c!
@ c!
gfffp
@ #!
 bB?
0B2 0
/etc/ppp/diald.defs
/etc/ppp/diald.conf
diald
Couldn't create IP socket: %m
Starting diald version %s
0.16
Diald initial setup completed.
%s/%s
/etc/ppp
Unable to create run file %s: %m
Creating FIFO
Using fifo %s
Could not open fifo file %s
sigaction(%d): %m
0123456789abcdef
/dev/pty%c%c
/dev/tty%c%c
Can't open slave side of pty: %m
block
FIFO: Block request received.
/sbin/ifconfig sl0 down
/sbin/ifconfig sl0 up
state
unblock
FIFO: Unblock request received.
force
FIFO: Force request received.
unforce
FIFO: Unforce request received.
down
FIFO: Link down request received.
FIFO: Link up request received.
delayed-quit
FIFO. Delayed termination request received.
quit
FIFO. Termination request received.
reset
FIFO. Reset request received. Re-reading configuration.
queue
FIFO. User requested dump of firewall queue.
--------------------------------------
debug %d
FIFO. Changing debug flags to %d.
dynamic %n%*s%n %n
FIFO: bad parameters '%s' and '%s' to dynamic command ignored
monitor
monitor %d %n
FIFO: monitor connection at info level %d to %s requested
FIFO: full monitor connection to %s requested
FIFO: %s not a pipe.
FIFO: could not open pipe %s: %m
FIFO: empty monitor request ignored
message 
MESSAGE
connect %d %n
FIFO: link up requested but denied
FIFO: no memory to store requested devce!
FIFO: link up requested on device %s
interface 
FIFO: interface set to %s.
0123456789
Unknown request '%s' made.
Forwarding packet of length %d
Error forwarding data packet to physical device: %m
SIGHUP: modem got hung up on.
SIGINT: Link down request received.
SIGUSR1. External link up request received.
SIGCHLD[%d]: pid %d %s, status %d
system
other
dial
link
Abnormal exit (status %d) on pid %d
Nonzero exit status (%d) on pid %d
child process %d terminated with signal %d
waitpid: %m
SIGTERM. Termination request received.
System call failure on command '%s'
Abnormal exit (status %d) on command '%s'
Nonzero exit status (%d) on command '%s'
running system pid=%d "%s"
failed to fork and run '%s': %m
/dev/null
could not exec program: errno=%d, buf=%s
running background pid=%d "%s"
could not exec background: errno=%d buf=%s
Monitor pipe %s closed.
diald.pid
/etc/ppp/LCK..
/etc/ppp
/sbin/route
/sbin/ifconfig
/bin/bootpc
/sbin/pppd
flushvars
flushprules
flushfilters
down
[<duration>,<fuzz>|<duration1>,<duration2>,<fuzz>]
impulse
<protocol-rule> <packet-rule>
ignore
accept
keepup
<protocol-rule> <timeout> <packet-rule>
bringup
or-restrict
<start-time> <end-time> <weekday> <day> <month>
restrict
<name> <spec>
<name> <protocol> <spec>
prule
dial-fail-limit
<time>
redial-backoff-limit
redial-backoff-start
died-retry-count
<count>
retry-count
first-packet-timeout
stop-pppd-timeout
start-pppd-timeout
kill-timeout
stop-dial-timeout
nodev-retry-timeout
redial-timeout
disconnect-timeout
<timeout>
connect-timeout
give-way
two-way
route-wait
buffer-timeout
-buffer-fifo-dispose
buffer-fifo-dispose
buffer_size
-buffer-packets
buffer-packets
path-pppd
path-bootpc
path-ifconfig
path-route
run-prefix
-pidstring
pidstring
<path>
lock-prefix
rotate-devices
crtscts
modem
<baudrate>
speed
lock
disconnect
connect
<device>
device
outfill
<0-255>
keepalive
-reroute
reroute
ip-down
ip-up
proxyarp
delroute
<script>
addroute
defaultroute
<mode>
dslip-mode
dynamic
netmask
remote
<ip-address>
local
window
fifo
pidfile
accounting-log
-daemon
<debugmask>
debug
mode
[ppp|slip|cslip|slip6|cslip6|aslip|dev]
include
-file
<file>
slip
cslip
slip6
cslip6
aslip
Unknown mode %s.
Valid modes are: dev, ppp, slip, cslip, slip6, cslip6, or aslip.
remote-local
local-remote
bootp
Unknown dynamic slip mode %s.
Valid modes are: remote, local, remote-local, local-remote or bootp.
usage: diald [modem-device1] [modem-device2 ...] [options...] [-- [pppd options...]]
where valid options are:
    %s %s
Insufficient arguments to option '%s'
Unknown option '%s'
Unable to open options file %s: %m
%1024[^
pppd-options
No device specified. You must have at least one device!
0123456789
Specified device '%s' not a character device.
You must define a connector script (option 'connect').
You must define the remote ip address.
Bad remote ip address specification.
You must define the local ip address.
Bad local ip address specification.
Can't open accounting log file %s: %m
speed %d not supported
could not get initial terminal attributes: %m
failed to set terminal attributes: %m
running dialer "%s"
failed to fork dialer: %m
/etc/ppp/connect-errors
could not exec dialer: errno=%d
Running connect (pid = %d).
Can't open requested device '%s'
Error opening device %s: %m
Couldn't find a free device to call out on.
failed to set modem to controlling tty: %m
failed to set process group: %m
failed to get initial modem terminal attributes: %m
failed to clear O_NDELAY flag: %m
Reopening modem device
Can't reopen device '%s'
Closing modem line.
Killing requesting shell pid %d
Could not get socket to do packet monitoring: %m
sl%d
ppp%d
Changed snoop device to %s
Could not get socket to do packet forwarding: %m
Closed fwdfd
User requested dump of firewall queue.
--------------------------------------
LOAD
%s --dev sl%d
/bin/bootpc
Could not run command '%s': %m
Timeout waiting for dynamic slip addresses
Error reading from modem: %m
Buffer overflow when reading IP address
Fetching IP addresses from SLIP server
New addresses: local %s, remote %s.
Can't get line discipline on proxy device: %m
No free slip device available for link.
Link device already in slip mode!?
SLIP not supported by kernel, can't build link.
Can't set line discipline: %m
Can't set encapsulation: %m
Can't set keepalive: %m (ignoring error)
Can't set outfill: %m (ignoring error)
Can't get line discipline: %m
Can't get encapsulation: %m
Couldn't set up the slip link correctly!
Slip link established on interface sl%d
%s sl%d %s pointopoint %s netmask %s mtu %d up
/sbin/ifconfig
%s sl%d %s pointopoint %s mtu %d up
%[^=]=%s
SERVER
IPADDR
%s sl%d
 RX packets:%d
/etc/ppp/LCK..
Can't read pid from lock file %s
Removed stale lock on %s (pid %d)
Couldn't remove stale lock on %s
Device %s is locked by pid %d
Can't create lock file %s: %m
%10d
failed to fork pppd: %m
too many arguments %s: %d
/sbin/pppd
-detach
modem
crtscts
netmask
could not exec %s: errno=%s
Running pppd (pid = %d).
ppp%d
failed to read ppp interface status
failed to get ppp local address: %m
failed to get ppp remote address: %m
failed to get ppp mtu setting: %m
PPP negotiated mtu of %d does not match requested setting %d.
Attempting to auto adjust mtu.
Restart diald with mtu set to %d to avoid errors.
New addresses: local %s, remote %s.
/sbin/ifconfig sl0 down
/sbin/ifconfig sl0 up
%s -n
/sbin/route
Could not run command '%s': %m
%*s %*s %*s %*s %*s %*s %*s ppp%d
%s ppp%d
/sbin/ifconfig
 RX packets:%d
Open device %s%d
Old %s , New device : %s %d
failed to read interface status from device %s
failed to get local address from device %s: %m
failed to get remote address: %m
New addresses: local %s, remote %s.
/sbin/ifconfig sl0 down
/sbin/ifconfig sl0 up
%s %s%d
/sbin/ifconfig
Could not run command '%s': %m
 RX packets:%d
%d.%d.%d.%d
ioctl(SIOCGIFCONF): %m
proxy arp: scanning %d interfaces for IP %s
proxy arp: examining interface %s
proxy arp: interface addr %s mask %lx
found interface %s for proxy arp
SIOCGIFHWADDR(%s): %m
proxy arp: found hwaddr %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x
Cannot determine ethernet address for proxy ARP
ioctl(SIOCSARP): %m
ioctl(SIOCDARP): %m
Carrying out delayed termination request.
Cannot get buffer to Update files
/etc/config/sonoma.conf
%s: Calling site %s.
Connect script failed.
Too many dialing failures in a row. Blocking connection.
Connect script timed out. Killing script.
Cancelling connect script in favour of FIFO request.
Sending SIGINT to (dis)connect process %d
Sending SIGKILL to (dis)connect process %d
%s: Connected to site %s.
pppd startup timed out. Check your pppd options. Killing pppd.
Cancelling link up requested denied in favour of existing link.
%s %d %s
Failed to received first packet within
seconds. Closing Link down.
state_timeout = -1, trans_UP
Closing down idle link.
DiScReAsOn
Idle Timeout
/etc/ppp/diag2.dat
  TERMINATION REASON.......... Local request
PPP network layer died, but link did not. Probable configuration error.
Link died on remote end.
pppd restart timed out. Killing pppd.
Disconnect script failed
Disconnect script timed out. Killing script.
%s: Disconnected. Call duration %d seconds.
      IP transmitted %d bytes and received %d bytes.
Delaying %d seconds before clear to dial.
Subprocess sent SIGKILL still alive after %d seconds. Reaping zombie.
HALF_DEAD
ZOMBIE
ERROR
RETRY
CLOSE
DISCONNECT
KILL_LINK
STOP_LINK
START_LINK
KILL_DIAL
STOP_DIAL
CONNECT
DOWN
STATE
new state %s action %d timeout %d
Alarm was %ld seconds early
Out of memory! AIIEEE!
Adding connection %d @ %ld - timeout %d
Update connection %d @ %ld - timeout %d
Deleting connection %d @ %ld
Refreshing impulse generator: mode %d, time %ld @ %ld
TCP : filter %s rule %d proto %d len %d seq %lx ack %lx flags %s%s%s%s%s%s packet %s,%d => %s,%d
accepted
ignored
 FIN
 SYN
 RST
 PUSH
 ACK
 URG
NON-TCP : filter %s rule %d proto %d len %d packet %s,%d => %s,%d
filter: prl %d log %d type %d cnt %d tm %d
    term: shift %d op %d off %d%c msk %x tst %x
%02ld:%02ld:%02ld
up = %d, forcing = %d, impulse = %d, iitime = %d, itime = %d, ifuzz = %d, itimeout = %ld, timeout = %ld, next alarm = %d
ttl %ld, %d - %s/%d => %s/%d (tcp state ([%lx,%lx] %d,%d))
STATUS
QUEUE
%-4s  %15s/%-5d  %15s/%-5d  
END QUEUE
%s parsing error. Got token '%s'. %s
parse string: '%s'
Out of memory! AIIEEE!
Parsing error. Got token '%s' when end of parse was expected.
Expecting whitespace
End of time slot must be later than start.
Weekday specification must be in range 0-6.
Month day specification must be in range 1-31.
Month specification must be in range 1-12.
Expecting a number for hours.
Hours value must be between 0 and 23
Expecting a ':'.
Expecting a number for minutes.
Minutes value must be between 0 and 59
Expecting a number for seconds.
Seconds value must be between 0 and 59
Expecting a number.
restrict
Expecting a string.
Rule name already defined.
Expecting a protocol name or 'any'.
Expecting number from 0-254.
Expecting a string or a number.
Offset definition out of range.
Expecting an offset definition: <num> or +<num>.
Expecting ':'
Not a known protocol rule.
Out of acceptable range for a timeout.
Bad inet address specification.
udp.
Not a known udp service port.
tcp.
service name = %s service port = %d service protocol = %s
Not a known tcp service port.
Not a known value name.
Expecting an <rvalue> specification.
Expecting a bit shift value.
Shift value must be in [0,31].
Expecting a ')'.
Expecting a new variable name
Expecting a variable name.
Not a known variable name.
prule
bringup
keepup
accept
ignore
impulse
Expecting a ','
Can't buffer packet of length %d, buffer to small.
Can't buffer packet of length %d, only %d bytes available.
Error forwarding data packet to physical device from buffer: %m
Can't get line discipline on proxy device: %m
No free slip device available for proxy.
Proxy device already in slip mode!?
SLIP not supported by kernel, can't build proxy.
Can't set line discipline: %m
Can't set encapsulation: %m
Can't get line discipline: %m
Can't get encapsulation: %m
Couldn't set up the proxy link correctly!
Proxy device established on interface sl%d
/bin/firewall
%s sl%d %s pointopoint %s netmask %s mtu %d up
/sbin/ifconfig
%s sl%d %s pointopoint %s mtu %d up
taking proxy device down
%s %s %s %s %s
255.255.255.255
running ip-up script '%s'
running ip-down script '%s'
window %d
Setting pointopoint route for %s%d
%s add %s metric %d %s dev %s%d
/sbin/route
Establishing routes for %s%d
INTERFACE
%s%d
%s add default gw %s metric %d %s dev %s%d
%s %s%d %s %s %s %d %d
default
Removing routes for %s%d
%s del default metric %d dev %s%d
Deleting pointopoint route for %s%d
%s del %s metric %d dev %s%d
%s %s%d %s %s %s %d
EOF on control fifo. Closing fifo.
Error on control fifo: %m
%s(%d): killpg(pgrp=%d,sig=%d)
killpg.c
syslog
<%d>%.15s 
<BUFFER OVERRUN ATTEMPT>
[%d]
/dev/console
/dev/log
SunMonTueWedThuFriSat
JanFebMarAprMayJunJulAugSepOctNovDec
Err Err 00 00:00:00 0000
+-#0 
hlLq
%nbopxXudicsfgGeEaA
(nil)
(null)
hlLq
%n[csoupxXidfeEgG
/bin/sh
/etc/services
/etc/protocols
%.*s
%0*d
%.*d
%c%+.2d
[truncated]