--- linux-2.4.29-uc1-cvs20050714/arch/armnommu/mach-cx821xx/tiburon-softreset.c.orig	2005-07-14 19:37:46.000000000 +0200
+++ linux-2.4.29-uc1-cvs20050714/arch/armnommu/mach-cx821xx/tiburon-softreset.c	2005-07-14 19:38:10.000000000 +0200
@@ -81,89 +81,3 @@
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Johann Hanne");
 MODULE_DESCRIPTION("Monitor the soft-reset button on the Tiburon (Actiontec DPCM)");
-/*
- * (C) 2005, Johann Hanne, GPL
- *
- * The Actiontec Dual PC Modem (aka DPCM and Tiburon) has a
- * reset button which must be software controlled; it is
- * connected to GPIO line 27
- *
- * This module implements an interrupt handler for it which
- * is limited to 1 interrupt per second (this is done by disabling
- * the interrupt as soon as one arrives and launching a timer
- * which enables it again); for each interrupt that occurs, a
- * SIGINT is sent to pid 1 (which should be an init process); note that 
- * it's left to the pid 1 process what to do; it could for example 
- * execute /sbin/reboot; it could also reset the configuration to 
- * factory defaults if the button remeins pressed for some seconds
- *
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/mtd/compatmac.h>
-#include <linux/mtd/mtd.h>
-#include <asm/arch/bsptypes.h>
-#include <asm/arch/cnxtflash.h>
-#include <asm/arch/gpio.h>
-#include <asm/io.h>
-
-static struct timer_list tiburon_softreset_reenable_GPIOB27_timerlist;
-
-static void tiburon_softreset_reenable_GPIOB27(unsigned long arg) {
-  SetGPIOIntEnable(GPIO27, 1);
-}
-
-void tiburon_softreset_GPIOB27_Handler(int gpio_num)
-{
-
-printk(KERN_DEBUG "HICKS GPIOB27_Handler\n");
-
-  /* Send a SIGINT to pid 1 (the init process) */
-  kill_proc(1, SIGINT, 1);
-
-  SetGPIOIntEnable(GPIO27, 0);
-  /* WriteGPIOData(GPIO27, 1); */
-  ClearGPIOIntStatus(GPIO27);
-
-  /* Send a SIGINT to pid 1 every second as long
-     as the button is pressed */
-  tiburon_softreset_reenable_GPIOB27_timerlist.expires = jiffies + HZ;
-  add_timer(&tiburon_softreset_reenable_GPIOB27_timerlist);
-}
-
-static void __exit cleanup_tiburon_softreset(void)
-{
-  if (tiburon_softreset_reenable_GPIOB27_timerlist.expires) {
-    del_timer(&tiburon_softreset_reenable_GPIOB27_timerlist);
-  }
-
-  SetGPIOIntEnable(GPIO27, 0);
-  ClearGPIOIntStatus(GPIO27);
-}
-
-int __init init_tiburon_softreset(void)
-{
-  SetGPIOIntEnable(GPIO27, 0);
-  SetGPIODir(GPIO27, GP_INPUT);
-  SetGPIOIntPolarity(GPIO27, GP_IRQ_POL_NEGATIVE);
-  SetGPIOInputEnable(GPIO27, GP_INPUTON);
-  GPIO_SetGPIOIRQRoutine(GPIO27, tiburon_softreset_GPIOB27_Handler);
-  SetGPIOIntEnable(GPIO27, 1);
-
-  tiburon_softreset_reenable_GPIOB27_timerlist.function = 
-    tiburon_softreset_reenable_GPIOB27;
-  tiburon_softreset_reenable_GPIOB27_timerlist.data = 0;
-  tiburon_softreset_reenable_GPIOB27_timerlist.expires = 0;
-
-  return 0;
-}
-
-module_init(init_tiburon_softreset);
-module_exit(cleanup_tiburon_softreset);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Johann Hanne");
-MODULE_DESCRIPTION("Monitor the soft-reset button on the Tiburon (Actiontec DPCM)");